Cisco Systems Cisco uBR10012 manual Console Port Cables and Pinouts, Figure B-2

Appendix B Cable Specifications

Console and Auxiliary Port Cables and Pinouts

Figure B-2 Rollover Cable

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

Roll over

127840

Figure B-3 RJ-45 Rollover Cable Identification

Pin 1 and pin 8

should be the

same color

Pin 1 Pin 8

H3824

The colored wires at one connector are in the reverse order at the other connector (reverses pins 1 and 8, 2 and 7, 3 and 6, 4 and 5, 5 and 4, 6 and 3, 7 and 2, 8 and 1).

A straight-through cable wires are in the same sequence at both ends of the cable.

Note If your cable was purchased from Cisco Systems, pin 8 is white.

Console Port Cables and Pinouts

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL) to connect the console port to a PC running terminal emulation software. Table B-1lists the signals and pinouts for the asynchronous serial console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-9 female DTE adapter.

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

OL-18259-01 B-3