SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Inspect/Adjust Weekly
❑Ensure seat is secured to wheelchair frame.
❑Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑Ensure seat release latch is not worn and is functional. Replace if necessary.
❑Inspect tires for flat spots and wear.
❑Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑Inspect and clean the stability lock gears. Replace if worn.
❑Ensure casters are free of debris.
Inspect/Adjust Monthly
❑Ensure wheel mounting nuts are secure on drive wheels.
❑Ensure there is no excessive side movement or binding when drive wheels are lifted and spun when disengaged (free‐wheeling).
❑Ensure wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Inspect for any loose hardware on the wheelchair.
❑Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑Verify that the hardware that attaches the seat positioning strap to the seat frame is secure and undamaged. Replace if necessary.
❑Ensure casters are free of debris.
Inspect/Adjust Periodically
❑Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑Ensure that casters are free of debris.
❑Ensure arms are secure but easy to release and adjustment levers engage properly (on ASBA only).
❑Ensure adjustable height arms operate and lock securely.
❑Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑Ensure armrest pads sit flush against arm tubes.
❑Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑Ensure seat release latch is not worn. Replace if necessary.
Part No 1143153 | 27 | Pronto® M91™Base with SureStep® |
