SECTION 5—WHEELCHAIR OPERATION
| Drive Profile Name | |
Available Modes in | Drive Indicator | Battery Gauge Display |
this Drive (Must be |
|
|
Programmed)
Icon appears when a |
|
|
| |
joystick command |
|
| Status | |
will drive the | Status/Info | ECU | ||
Indicator | ||||
wheelchair | Message Area |
| ||
|
|
FIGURE 5.6 LCD Display Screens - Main Screen
Driving Screen
NOTE: For this procedure, refer to
FIGURE 5.7.
This screen is shown when the operator issues a drive command and the Drive Icon on the main screen was highlighted.
NOTE: The Drive’s name, warning/info message, status icon and battery indicator are displayed on this screen.
FIGURE 5.7 LCD Display Screens - Driving
Screen
Connected Devices Screen
NOTE: For this procedure, refer to FIGURE 5.8.
This screen is displayed if the Mode Select switch is held active for about 10 seconds. This screen shows an icon that represents any additional devices that are connected to the chair.
Pronto® M91™Base with SureStep® | 40 | Part No 1143153 |
