SECTION 5—WHEELCHAIR OPERATION
ICON DESCRIPTION
RIM Control
ECU (1 to 4)
Proportional Attendant Control
Compact Joystick
Sip and Puff Control
ASL Digital Control
ASL Analog Control
Shark Power Module Actuator
FIGURE 5.8 LCD Display Screens - Connected Devices Screen
Programmable Mono Port 1/2 or External Mode Switch
The programmable mono port or external mode switch input is located at the rear of the
joystick on the left side. The programmable mono port input offers the choice of three
options:
•Remote drive select
•Remote stop/mode (reset) input
•Single actuator input
The single switch functions operate through mono port 1. An optional y‐cable allows a second programmable function through mono port 2.
Remote Stop Switch
The remote stop switch is used to stop the wheelchair.
Remote Mode (Reset) Switch
The remote mode reset switch functions the same way as the mode switch. Refer to Mode Switch on page 42.
Remote On/Off Switch
The remote On/Off switch input is located at the rear of the joystick on the right side and allows the power switch to be operated by an ability switch (normally open momentary switch with mono plug). To use the remote On/Off feature, the Drive Select/On/Off switch must be in the On position. Each activation of the ability switch will alternately turn the joystick On or Off.
Part No 1143153 | 41 | Pronto® M91™Base with SureStep® |
