SECTION 9—BATTERIES

When to Charge Batteries

SPJ+ Joysticks

NOTE: For this procedure, refer to FIGURE 9.4.

The Information Gauge Display located on the front of the joystick housing, it provides the state‐of‐battery charge, including notification of when the battery requires charging. It also provides the following information to the user on the status of the wheelchair:

A.GREEN LEDs are lit, indicating well charged batteries.

B.AMBER LEDs are lit, indicating batteries are moderately charged. Recharge batteries before taking a long trip.

C.RED LEDs are lit, indicating batteries are running out of charge. Recharge batteries as soon as possible.

Batteries

Information Gauge Display

Empty

Batteries Full

 

Battery Charger/

Programming Port

FIGURE 9.4 SPJ+ Joysticks

MPJ+ Joystick

NOTE: For this procedure, refer to FIGURE 9.5.

The far right side of the display screen is the Battery Gauge Display (BGD). It provides information on the remaining charge in the batteries.

At full charge, solid blocks fill in all ten segments between E (Empty) and F (Full). As the battery becomes discharged, the segments will progressively disappear a bar at a time until no segments appear between E and F. At this level the user should charge the batteries as soon as possible.

Display

Screen

Battery Gage

Display

FIGURE 9.5 MPJ+ Joystick

Pronto® M91™Base with SureStep®

62

Part No 1143153

Page 62
Image 62
Invacare Pronto M91 Base manual When to Charge Batteries, SPJ+ Joysticks, MPJ+ Joystick