SECTION 9—BATTERIES
NOTE: Perform this section on one battery at a time starting with the FRONT battery. Repeat STEP 10 to remove remaining battery from battery tray.
11.Perform one of the following to remove the battery from the battery tray:
•Batteries With Built‐in Lifting Strap‐ Use built in lifting strap to remove the battery from the battery tray (Detail “A” of FIGURE 9.1).
•Batteries Without Built‐in Lifting Strap‐ Use the battery lifting strap to remove the battery from the battery tray (Detail “B” of FIGURE 9.1).
Connecting/Disconnecting the Battery Wiring Harness
NOTE: Perform this section on one battery at a time starting with the front battery.
NOTE: The front battery has three connectors ‐ two to the rear battery wiring harness (RED and BLACK) and one to the controller cable (RED), and the rear battery has two connectors (RED and BLACK) to the front battery wiring harness.
NOTE: Both the front and rear wiring harnesses are shipped with the POSITIVE (+) RED battery cable and mounting screw connected. Use the exposed, threaded portion of the mounting screw to secure the POSITIVE (+) RED cable to the POSITIVE (+) terminal.
WARNING
DO NOT remove fuse or mounting hardware from POSITIVE (+) RED battery cable/mounting screw.
All battery terminal covers (two on the front battery and two on the rear battery) MUST be installed prior to use.
Connecting
NOTE: For this procedure, refer to FIGURE 9.3 on page 61.
1.Peel back RED battery terminal cover to expose RED battery cable connection to battery terminal.
2.Peel back BLACK battery terminal cover from BLACK battery cable on front battery or GREY battery terminal cover from BLACK battery cable on rear battery.
3.Using the mounting screws and nuts, secure the NEGATIVE (‐) BLACK battery cable to NEGATIVE (‐) battery terminal/post as shown in FIGURE 9.3.
4.Using the mounting screws and nuts, secure the POSITIVE (+) RED battery cable to POSITIVE (+) battery terminal/post as shown in FIGURE 9.3.
5.Verify wiring harness is correctly installed and securely tightened.
6.Verify proper battery orientation.
Pronto® M91™Base with SureStep® | 60 | Part No 1143153 |
