SECTION 8—SHROUD/WHEELS
Installing
1.Perform one of the following:
•Top Shroud ‐ Position top shroud on to the base frame and gently press down on top shroud to secure the four hook and loop strips that secure the top shroud to the base frame (Detail “A”).
•Front Shroud ‐ Position front shroud onto the two base frame hooks. Turn release knob ¼‐turn to the locked position (Detail “B”).
2.Perform one of the following:
•Wheelchairs with Formula PTO Plus ‐ Tilt the seat forward. Refer to Tilting the Seat Assembly on page 47.
•Wheelchairs without Formula PTO Plus ‐ Reinstall the seat. Refer to Removing/ Installing the Seat Assembly on page 46.
DETAIL “A” - TOP SHROUD
| Top Shroud |
Rear of | Seat Supports |
Wheelchair |
|
Base Frame |
|
Hook and | Front of |
Loop Strips | Wheelchair |
|
DETAIL “B” - FRONT SHROUD
Base
Frame
Hooks
Front
Release Shroud
Knob
FIGURE 8.1 Removing/Installing the Shrouds
Part No 1143153 | 53 | Pronto® M91™Base with SureStep® |
