SECTION 9—BATTERIES

Required Items:

 

 

 

 

 

TOOL

QUANTITY

COMMENTS

Battery Charger

1

Supplied

 

 

 

Extension Cord

1

Not Supplied

 

 

 

1.Attach the battery charger connector to the charger port on the joystick.

2.Plug the charger’s AC power cord, or extension, into the grounded 120 VAC wall outlet.

3.Wait until charging is complete.

NOTE: Allow eight hours for normal charging. Larger batteries (greater than 55 ampere‐hours) or severely discharged batteries may require up to sixteen hours to be properly charged and equalized.

NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a battery’s life is extended if the charge level is maintained well above a low condition.

NOTE: If the batteries need to be charged more often or take longer to charge than normal, they may need to be replaced. Contact an Invacare dealer for service.

SPJ Joysticks

Charger/

Programming

Port

MPJ Joystick

Charger/Programming Port (On

Front of Joystick)

FIGURE 9.7 Charging Batteries

Pronto® M91™Base with SureStep®

66

Part No 1143153

Page 66
Image 66
Invacare Pronto M91 Base manual Required Items, Tool Quantity