IOGear GCS138 Setup and Installation Power Adapter, Step. 1 Power Adapter Connection

Installation

Setup and Installation (Power Adapter)

Step. 1 (Power Adapter Connection)

* Before you begin, please make sure that the power to all devices has been turned off.

Connecting your console to the MiniViewTM ULTRA. You will need your VGA monitor, PS/2 mouse, PS/2 keyboard and the MiniViewTM ULTRA power adapter.

NOTE: To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded. Consult your dealer for technical details, if necessary.

The Unit is designed to be non-powered (no external power required). Generally speaking, the only time that external power is required is when you daisy chain it, or if operation becomes erratic because the unit isn’t obaining enough power from the computer connections.

If you choose to use external power, plug the adapter into a standard surge protector, then plug the cable into the MiniViewTM ULTRA Power Jack.

12