JAI TM/TMC-4200CL - page 24

Page 14
Graphical User Interface
Dual-Tap TM-4200CL AccuPiXEL Series Camera-Control Software
3.3.8 Trigger
Use the option buttons to select either Active High or Active Low.
FIGURE 24. Set “Trigger” by clicking the desired option button.
3.3.9 LUT (Look-Up Table)
The Knee Control box allows you to set your own knee value to each LUT. For more detail regarding
knee control, “Programmable Look-Up Table (LUT) and Knee Control” on page45.
3.3.9 (a) Positive or Negative LUT Selection
The LUT control panel allows you to select the positive or negative LUT. Choosing “Positive” provides
a normal image. Choosing the “Negative” option causes the image to appear reversed, as in a film
negative.
FIGURE 25. Set “Positive” or “Negative” LUT.
3.3.9 (b) LUT (Look-Up Table) Table Selection
The LUT Table drop-down box offers Linear, Gamma .45 or Knee selections.
FIGURE 26. Table drop down menu: