Page 22

Installation

5 Installation

The following instructions are provided to help you to set up your camera quickly and easily. We suggest that you read through these instructions before you unpack and set up your camera system.

5.1 Getting Started

5.1.1Unpacking Instructions

We recommend that you save the original packing cartons for the cameras and accessories in case you need to return or exchange an item.

We also recommend that you bench-test any equipment being sent to another location for field installation to assure that everything is fully operational as a system.

5.1.2Components List

Check your order against the Components List shown below to assure that you have received everything as ordered, and that nothing has been overlooked in the packing materials. If any item is missing contact your JAI representative immediately.

TM-4200CL camera

Camera-specific data sheet

Camera-appropriate operation manual (if ordered)

Dual-tap AccuPiXEL camera-control software

5.1.3Accessories and Options

Following is a list of additional accessories and options that may be required for your application. Please check with your JAI representative before you install your camera to determine what you might need.

PD-12U series power supply

12P-02S power cable

26CL-02-26 Camera Link cable

5.2Camera Setup

5.2.1Heat Dissipation

The TM-4200CL is a compact 2K by 2K camera. Since all the electronics have been packed in a compact package, the outer case of the camera can become hot due to heat dissipation. For optimal performance, JAI recommends using a cooling fan to set up a positive air flow around the camera and following the precautions below.

TM/TMC-4200CL Series Progressive Scan Cameras

Page 32
Image 32
JAI TM/TMC-4200CL operation manual Installation, Getting Started, Camera Setup