JAI TM/TMC-4200CL operation manual TM-4200CL Command List, Scan Mode

Page 48

Serial Communication Kit

7.2 TM-4200CL Command List

The LVDS-version camera can be controlled via RS-232 commands. The Start character is always “:” and the End character is always “CR” (return). For example, to set Asynchronous Pulse Width Mode, send the command :SA9“CR” to the camera. The following table contains RS-232 commands that can be used to control the camera.

TABLE 7.		TM-4200CL Command List
Command			Parameter	End of	Ack. Response	Description
				Cmd
Scan Mode
:SMD			X	<cr>	:o<cr>	Set Preset Scan Area
						(X=A,B,C,D,T)
:SMDZ=			X	<cr>	:o<cr>	Set Digital Zoom (X=0,1,2,3)
:SMDU=			XXXXYYYY	<cr>	:o<cr>	Set Programmable Scan Area
						(XXXX=0000 - 07FF,
						YYYY=0001 - 0800)
:SMD?				<cr>	:oMD[X]<cr>	Inquire current scan mode
						(X=A,B,C,D,T,Z,U)
Shutter Mode and Shutter Speed
:MSH=			X	<cr>	:o<cr>	Set Continuous Mode Preset Shut-
						ter ( X= 0 - 9)
:DSH=			XXX	<cr>	:o<cr>	Set Continuous Mode Program-
						mable Shutter ( XXX=000 - total
						lines)
:ASH=			X	<cr>	:o<cr>	Set Async Mode Preset Shutter
						(X=0 - 9, A, B) ( X=0 async no
						shutter,
						( X=1-8 Preset Shutter, X=9
						PWC, X=A Fixed exposure PIV,
						X=B PWC PIV)
:ADS=			XXX	<cr>	:o<cr>	Set Async Mode Programmable
						Shutter (XXX=000 - 81F)
:SHR?				<cr>	:o[shtr]<cr>	Inquire current shutter mode
Gain and Offset
:MGA=			XXX	<cr>	:o<cr>	Set Master Gain
						(XXX = 000 - FFF)
:MGB=			XXX	<cr>	:o<cr>	Set R channel Fine Gain
						(XXX = 000 - FFF)
:VRA=			XXX	<cr>	:o<cr>	Set Master Offset
						(XXX = 000 - FFF)
	TM/TMC-4200CL Series Progressive Scan Cameras