Page 17

Graphical User Interface

3.3.11 (b) Test Pattern

From the main menu, select “Option” and click ‘Test pattern” to enable or disable the test pattern

FIGURE 31. Use the “Option” menu to access the test pattern.

3.3.11 (c) Pixel Output Order

FIGURE 32. Use the “Option” menu to access the test pattern.

From the main menu, select “option” and “Video data output order” and click “<--- <---” or “<--- ---

>”

or “<<------

 

“<---

<---

” = First video data are pixel no. 1 and no. 1025.

 

“<---

---

>” = First video data are pixel no. 1 and no. 2848.

 

“<<------

” = First video data are pixel no. 1 and no. 2.

 

3.3.12 EEPROM

Dual-tap AccuPiXEL cameras have seven pages available to restore the cameras’ settings. Page 0 is the factory default page and cannot be edited without a password. Page 1 is power up default. This page will allow you to save default setting to load at power up.

3.3.12 (a) Load Page

From the main menu, select “file” and “load page” and click the page number and load camera setting from EEPROM.

3.3.12 (b) Save Page

From the main menu, select “File,” “Save Page,” and click the page number to save the current camera setting to EEPROM.

Note: Page 0 is the factory default page and is protected by password.

Dual-Tap TM-4200CL AccuPiXEL Series Camera-Control Software

Page 27
Image 27
JAI TM/TMC-4200CL operation manual Eeprom, Test Pattern, Load, Save