Page 18
Graphical User Interface
3.3.12 (c) Read Page
From the main menu, select “File” “Read Page,” and click the page number to read the EEPROM. When you read the page from EEPROM, the current camera setting will not be changed.
3.3.13 Main Menu “Connectivity”
If the camera has a small receive buffer, it is important to sent the “Receive buffer is small” option from the Connectivity menu. Otherwise the information in the Report section may display in a matter that can not be understood.
FIGURE 33. Use the “Connectivity” menu to set buffer size.
3.3.14 Main Menu “About”
FIGURE 34. The “About” menu provides hardware and software information.
3.3.14 (a) Camera Model
From the main menu, select “About” and click “Camera Model” to check the camera information.
3.3.14 (b) CPU Firmware Version
From the main menu, select “About” and click “CPU Firmware Version” to check the CPU firmware information.
3.3.14 (c) About Control Software
From the main menu, select “About” and click “About Control Software” to check the software information.
3.3.15 Exit
From the main menu, select “File,” and click “Exit” to exit the software.
