Conair 25, 15, 50, 100 specifications Cleaning the Process Filter, Cleaning the Regeneration Filter

Cleaning the Process Filter

Clogged filters reduce air flow and dryer efficiency. Cleaning frequency depends on how much material you process and how dusty it is.

1 Remove the process filter.

Remove the black plastic knob. Pull the cap off. Remove the wing nut. Remove the filter cap and filter.

2 Clean the filter tube.

3 Using compressed air, clean

the process filter by blowing air from the inside out. Replace damaged, worn, or clogged filters.

CAUTION: Wear eye protection. If you use compressed air to clean the equipment, you must wear eye protection and observe all OSHA and other safety regulations pertaining to the use of compressed air.

4Reverse the procedure to reinstall the process filter.

Cleaning the Regeneration Filter

Clogged filters reduce air flow and dryer efficiency. Cleaning frequency depends on how much material you process and how dusty it is.

1Remove the regeneration filter. Remove the two bolts and the metal screen.

2Clean the regeneration filter. Clean dust, fines, and dirt from the filter, or replace it with a new filter.

3Reverse the procedure to reinstall the regeneration filter.

5 - 4 l M a i n t e n a n c e