Conair 15, 25, 50, 100 specifications How Conveying Works, Central

How Conveying Works

When the conveying function is turned on, the MDC uses dry air to move material from the drying hopper to the process machine as it is needed.

4Material enters the vacuum receiver and falls into the receiver and viewing chamber. The blower pulls air through the vacuum receiver filter into the return air conveying line.

1Dry material drops into the distribution box when the slide gate on the drying hopper is

opened.

Central

When config- ured as a cen- tral dryer, the MDC option is not available.

5The conveying blower runs until the

load time set at the MDC control is reached. When the material level drops below the demand sensor, the sensor signals for more material. The conveying blower turns on again.

3 Positive and negative air flow generated by the blower moves the material from the distribution box beneath the drying hopper to the vacuum receiver.

2 When the conveying

function is turned on,

the conveying blower

starts.

6The dust collector traps dust and fines before the returning air reaches the blower.

A p p e n d i x l G - 3