Conair 50 Control Function Descriptions c o n t i n u e d, S c r e e n, F u n c t i o n, H off

Control Function Descriptions ( c o n t i n u e d )

S c r e e n

Screen 28-43 require access code 755.

SCREEN 34 (Test Mode Screen)

H off 7

SCREEN 35 (Test Mode Screen)

H off 8

SCREEN 36 (Test Mode Screen)

H off 9

SCREEN 37 (Test Mode Screen)

H off 10

SCREEN 38 (Test Mode Screen)

F u n c t i o n

This is the Test Mode screen for the isola- tion contactor. By pressing the + or - keys, the setting can be changed. When set to "On", the isolation contactor output will be turned on for 3 sec. and then shut off auto- matically.

This is the Test Mode screen for the alarm output (horn and or red light). By pressing the + or - keys, the setting can be changed. When set to "On", the alarm output will be turned on for 3 sec. and then shut off auto- matically.

Note: The alarm light on the membrane

✐switch will not come on. If the optional alarm horn or red light is not installed, nothing will happen.

This is the Test Mode screen for the pre- cooler flow control valve. By pressing the

+or - keys the setting can be changed. When set to "On" the precooler flow con- trol valve output will be turned on for 3 sec and then shut off automatically.

✐Note: If the optional precooler flow control valve is not installed, nothing will happen.

This is the Test Mode screen for the after- cooler flow control valve. By pressing the

+or - keys, the setting can be changed. When set to "On", the aftercooler flow control valve output will be turned on for 3 sec. and then shut off automatically.

✐Note: If the optional aftercooler flow control valve is not installed, nothing will happen.

This screen is not used in the current pro-

4 - 14 l O p e r a t i o n

H off 11

gram.