Conair 25, 15, 50, 100 specifications Setting the High Setpoint Limits, 0 754, C 400 C02, Central

Central

When configured as a central dryer, the high setpoint limits can not be set since there is no process heater in the system.

Setting the High Setpoint Limits

You can protect your drying process by preventing someone from entering process temperatures above an acceptable level for the material. You can also set the high limit equal to the process temperature to prevent accidental or unauthorized changes to the setting during operation.

1Turn on the main power to the dryer.

2While at the default screen (screen 5) press the scroll button and the (-) minus button simultaneously to get to screen 14

0 0

3On screen 14 enter the password for set up screens (754).

0 754 0

4Scroll to screen 16.

C 400 C02

This is your current high setpoint limit. Press +/- keys to set a new high setpoint limit.

✒Tip: We recommend that you set your high setpoint limit 10° higher than your maxi- mum high temperature setpoint to avoid unwanted alarms.

5To lock in your new high setpoint limit and exit the password protected screens, scroll back to screen 14,

0 754 0

then enter 500 and hit scroll.

4 - 20 l O p e r a t i o n