Conair 15, 25, 50, 100 specifications To Start Dr ying, Central, O p e r a t i o n

To Start Dr ying

1Make sure there is material in the hopper.

2Turn on the main power to the dryer. Make sure the dryer’s disconnect dial is in the ON position. This powers up the con- trol and the display lights will illuminate.

3 Set the drying temperature. Use the Scroll button to get to the Process Temp function. Press the Adjust Setpoint ▲ or J￿buttons to select the temperature.

When configured as a central dryer, the drying temperature can not be set since there is no process heater in the system.

Central

					Set Point		Actual
Shutdown Alarms
A1	Process HighTemp.
A2	Process Loop Break
A3	Process Heater HighTemp.	1	ProcessTemp.
A4	Regen. Heater HighTemp.	2	Regen.Temp.	Process Blower		Regen. Blower	Auto Start
A5	Carousel IndexToo Long	3	Return AirTemp.	Process Pressure		Regen. Pressure	Desiccant Indexing
A6	Carousel Index Failure	4	Auto Start
A7	Return Air HighTemp.	5	LoadTime (MDC)	Process Heater		Regen. Heater	Set-Back Temp.
Passive Alarms		6	Activate SetbackTemp.
		7	SetbackTemp.(Process)
P1 ProcessTemp. Deviation		8	Setback Load Rate
P3 Regen.Temp. Deviation		9	PM1 Dewpoint
P5 Return Air HighTemp.

(continued)

4 O p e r a t i o n

O p e r a t i o n l 4 - 1 7