Jenn-Air SCE4320, SCE4340 manual Other Hints on Caring for Your Range, Oven Light Bulb, Oven Racks

Other Hints on Caring for Your Range

Oven Light Bulb

Before replacing bulb, disconnect power tooven at the main fuse or circuit breaker panel.

Be sure that the entire oven cavity including the light bulb is cool before attempting to remove.

To replace light bulb:		_._,	_,	]
1.	Carefully remove the glass light lens and lens retainer by
	removing the two screws inthe light lens retainer using a
	phillips screwdriver. Note: The light lens is separate from
	the light lens retainer. The two pieces will drop down into
	your hands at the same time. Do NOT remove the
	remaining two screws.	I\\	\\	I
2.	To obtain firm grasp on bulb, wear protective rubber	__		I
	gloves. Remove by turning bulb to the left. Do not touch

a hot oven light bulb with a damp cloth as bulb will break. NOTE: Ifthe bulb does break and you wish to remove it, becertain power supply is disconnected and wear protec-

tive gloves. You may contact your authorized Jenn-Air Service Contractor for service.

3. Replace bulb with a 40 watt oven-rated appliance bulb. Bulb with brass base is recommended to prevent fusing of bulb into socket.

4. Place light lens inside of light lens retainer. Holding the light lens and lens retainer in place, insert the two screws into the light lens retainer and tighten.

Oven Racks \

_'O rem°ve	PUll f°_ward	t° the Hst°pn P°siti°n;	_	_fi
lift up on the front of the rack and pull out.			_ ___/_

_ o _ _

40