Jenn-Air SCE4320, SCE4340 manual Turn SET dial to time desired

Models: SCE4340 SCE4320

1 41
Download 41 pages 30.83 Kb
Page 32
Image 32
2. Turn SET dial to time desired.

7.The cleaning process begins immediately unless the self-cleaning process has been set for a delayed start. When the oven temperature reaches550°F,the LOCK INDICATOR LIGHT will glow and the doorcannot be opened until the temperature drops below 550°F. DO NOT TRY TO UNLOCK THE DOOR WHILE LOCK INDICATOR LIGHT IS ON. The normal cleaning process takes the time selected on the clock plus about 45 minutes for the oven to cool down before the LOCK INDICATOR LIGHT goes out and the door can be opened.

8. At the end of time set, oven will stop automatically and not beep.

9.After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER to the left. The oven door can now be opened.

10.Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after the door is unlocked.

IMPORTANT: IFTHETEMPERATURE KNOB ISTURNEDTO OFF BEFORETHE

DOORIS UNLOCKED, THEDOOR WILLNOTOPEN. Forcingthe lockwill damage the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the door, then turn TEMPERATURE knob OFF.

NOTE: Afan comes onwhenever the SELECTOR knob is seton CLEAN; therefore,

the fan will continue to operate at the end of the cleaning process until the SELECTOR knob is turned OFF. The fan will also start as soon as the controls are

set for a delayed start of the self-cleaning process.

To check START TIME before cleaning

begins:

Hold in START TIME

button until the words START TIME appear in the Display Window. The start time will be displayed briefly, then Display will return to time of day.

To change START TIME before cleaning begins:

1. Hold in START TIME button until the words START TIME appear in the Display Window.

2. Turn SET dial to time desired.

3.Push ENTER button to enter new start time.

The indicatorwords STOP TIMEand anew stoptime will appear in Display Window. The new stop time will be 2 1/2 hours later than the new start time.

For a heavily soiled oven, the stop time will need to be changed by turning the SET dial.

4.Push ENTER button to enter new stop time.

34

Page 32
Image 32
Jenn-Air SCE4320, SCE4340 manual Turn SET dial to time desired