To adjust grill burner air shutters and surface burner air shutters (some models)
The left hand air shuttercontrolsthe rear half of the grill burner, or the rear surface
burner.The righthandshuttercontrolsthe fronthalfofthe grillburneror thefrontsurface burner.
Slide air shutter backward or forward to |
|
increaseordecreasethesizeoftheairopening. __NGRILL | BURNERAIRSHUTFER |
screwdriverblade may be requiredto make |
|
this adjustment, Observe change in flame |
|
apAirpeashurancetters fitasstnughe lyaironshuthtterburnisemovr, soeda. __E_'_ | D IVERBLADE |
Adjustment is satisfactorywhen a clearly | INSLOTAND'rWISTWITH |
defined, even blue flame results at the Hi | SLIGHT PRESSURE TO ALLOW |
AIRSHUTTERTOSLIDEEASILY. | |
flame setting. The snugfit of the air shutter |
|
assures it will remainpositionedcorrectly. |
|
On any burner,closingthe air shuttertoo far willcause the flame to become soft and yellowtipped.Openingthe air shuttertoo wide will cause the flame to blowaway from
the burnerports, Proper adjustmentwill producea sharp, clearly defined even, blue flame.
This appliancehas been shipped from the factory with Lo and Med flame settings adjustedfor usewith naturalgas and average installations.There is a wide variety of conditionscausedbyaltitudeand gas mixturescontrolledby utilitycompanieswhichwill vary and affectthe gas flame and performance.Adjustmentsshouldbe made at time of installation. If conditionschange, follow the procedures outlined below to adjust the Lo setting.
To adjust the Lo setting
1.Light burnerand set controlknob for lowflame. 2. Remove control knob from valve stem.
CAUTION: Never use a metal blade to pry |
|
|
knob off. If knob cannot be easily removed |
| CLCCk'W/,S_ |
tuck the folds of a cloth dishtowelunder the |
| TOREOUCE |
knob skirt and pull the towel forward with | _ | _lr_ |
steady, even pressure.
3. Insert a slender, |
|
the recessat centerof valve stemand engage | COU_RCLOC.W,SE |
blade with slot in adjustingscrew. | SIZETONCR_FSEME |
4.Turn center stem adjustingscrew slightlyto _ set flame size.Note: Turn clockwiseto reduce
or counterclockwiseto increase flame size.
5.Replacecontrolknob when adjustmentis completed.
Proper adjustmentwill producea stable,steady blue flame of minimumsize. The final adjustmentshould be checked by turning knobfrom Hi to Lo several times without extinguishinghe flame. This adjustment,at the Lo setting,will automaticallyprovide
the proper flame size at Meal setting. | 13 |
