Thesurfaceburnermoduleconsistsoftwosurfaceburner grates,an aerationtrayand
a burnerassembly.
To Install Burner Module
1. Besurecontrolknobsareturned Off.
2. If the grillburnerandgrill gratesarein place, removebefore instarlingasurface
burnermodule.Cleanburnerbasinofany greaseaccumulation.(Seepage 21 for
cleaningrecommendations.)
3. Positiontheburnerassemblywiththemixertubeopeningstowardtheorifices.Slide
theburnerassemblytowardtheorificesuntilopeningforigniterisovertheigniter.
Lowerintoplaceuntilsideopeningsarerestingon theburnersupportsandigniter
iscentered betweenthe twoflash tubes.
4. Installtheaerationtraybyinsertingtheprongatthe endofthe panintothe opening
inthe end oftheburnerbasin.Lower theoppositeendintothe rangetop.
Note: Beforefirstuse,readtheSurfaceBurnerOratesCareinstructionsfoundon
page46.
To Remove Burner Module
1. Control knobsshouldbeintheOff positionandtherangetopshouldbe cool.
2. Removetheaerationtrayby liftingupthe frontendon therightside (backend on
theleft side) until thetop clearstheopeningof the rangetopby about5 inches.
3.Holdaerationtraybythesidesandslideawaytoremovethe prongfromtheopening
andclear thesurfaceburners.
4. Liftupon the sidesofthe surfaceburnerassemblybracketabout 2inches.Slide
awayfrom theorifices.
NOTE: Optionalsurfaceburnerassembly,ModelAG202, can replacethegrillburner
assembly.ModelAG202 airshuttershavebeenadjustedfor compatibilityon
theleft side.
NOTE: Do not disassemblethesurfaceburnerassembly.
16