Important: This interval Timer can be used to remind you when a period, up to 11 hours and 55 minutes, expires. It can be used independently of any other oven activity and can be set while another oven function is operating. The Timer does not control the oven.

To set Timer

1. Touch a Timer Pad,

The Indicator Word TIMER and either 1 or 2 flashes and "0Hr:00" appears in the Display.

2.Touch the appropriate number pads until the desired number of minutes or hours and minutes appear in the Display.

Note: If more than five seconds elapse between touching a Timer Pad and a number pad, the Timer Pad must be touched again.

Example: To set Timer One for 5 minutes, touch the Timer One Pad and the number pad "5". After five seconds, the Display will show:

:05

Example: To set Timer Two for 1 hour and 30 minutes, touch the Timer Two Pad and the number pads "1, 3, 0". After five seconds, the Display will show:

1:90

Countdown will star[ after five seconds. Countdown will have display precedence over other time functions. If both timers are set, the timer with the least amount of time remaining will have display precedence.

At the end of time set, the Timer will chime four times and "End" will appear in the Display. If the Timer is not cancelled (see below), "End" will remain in the Display and there will be two chimes every thirty seconds for five minutes.

To cancel Timer

1.Touch and hold the Timer Pad for four seconds.

OR

2.A. Touch the Timer Pad

B. Touch "0" number pad. Five seconds later the Timer will be cancelled.

NOTE: Touching Cancel Off Pad to cancel chimes will cancel ALL selected oven /

programming.

J

 

27

Page 27
Image 27
Jenn-Air SVD48600 manual To set Timer, To cancel Timer