![](/images/new-backgrounds/1314705/314705105x1.webp)
Chapter 8
Managing RAID Disks on a C-series Platform
This chapter describes how to manage and view status information for RAID disks on a
■
■Managing Disks in a
C-series Platform Data Storage
A
When you replace a faulty disk and initialize it, or disable and then enable a disk, the RAID controller copies all the data from the active disk to the enabled or initialized disk and establishes mirroring for the two disks.
The location of the disk mount for the disks depends on the model of the
■C2000
■C4000
When you access the disks in the disk mount:
■Disk 0 is to the left.
■Disk 1 is to the right.
You can also use the request disk identify command to make the LED for a specified disk blink to verify which disk is disk 0 and which is disk 1.