Show disk status Output Fields | Juniper Networks C4000, C2000

C2000 and C4000 1.0.x Hardware Guide

Controller Tasks

TaskId Function Done% Container State Specific1 Specific2

------ -------- ------- --------- ----- --------- ---------

No tasks currently running on the controller

Table 8: show disk status Output Fields

Field Name	Field Description
C:ID:L	C indicates the channel number, ID the device ID, and L the device logical number
Device Type	Type of device; disk
Blocks	Number of blocks available on the disk
Bytes/Block	Number of bytes for each block
Usage	Status of disk:
	■ Detached—Not available for use
	■ Initialized—Prepared for use with arrays
	■ Not initialized—Not prepared for use with arrays
	■ Offline—Present at system boot, but the disk was removed or failed
	■ Unowned—The controller does not control the disk
Shared	Whether or not the disk is on a shared channel
Rate	Disk speed in megabytes per second
Smart Capable Device	Whether or not the device is enabled for Specifies if Self-Monitoring, Analysis and
	Reporting Technology (SMART)
Methods of Informational Exceptions	List of MIE exceptions
(MIE)
Enable Exception Control	Whether or not SMART exception reporting is enabled
Performance Enabled	Whether or not performance is enabled
Error Count	Number of errors that SMART found on the disk
Controller Tasks	The No tasks currently running on controller message indicates that no tasks are
	running, including initialization.

42■ Managing Disks in a C-series Platform