JVC LVT1437-001A, 1105RYMMDWJEIN manual Connecting video components, Video conversion function

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

Video conversion function

This receiver can convert the video signals output from video components. The chart below shows which video signals can be converted into which signals by video conversion.

Video Input Converted

HDMI

CMPNT (component)

S (S-video)

C (composite)

RGB

NOTES

Video Output

HDMI

CMPNT (component)

S(S-video)

C (composite)

RGB

To use the video conversion function, you need to make the two settings below when you finish connecting your TV and video components.

VIDEO OUTPUT: Select the settings according to the connection method for your TV. See pages 10 and 33 for details.

VIDEO INPUT: Select the settings according to the connection method for your video components. This setting is memorized for each source. See pages 11 to 15 and 20 for details.

Converted video signals available vary depending on each source component. See also page 10 to 15 for details.

•HDMI and RGB signals cannot be converted into other video signals.

•With HDMI signals transmitted or input video signals converted into HDMI signals, the playback picture may be distorted when you change the playback mode (fast-forward, rewind, or pause, for example).

Before connecting video components

About HDMI

IMPORTANT:

The HDMI video signals from the HDMI terminal are transmitted only through the HDMI MONITOR OUT terminal.

Therefore, if the TV is connected to the receiver through the AV IN/OUT terminal (TV) or COMPONENT VIDEO jacks (MONITOR OUT) and a playing video component is connected to the receiver through the HDMI terminal (VIDEO (VCR) IN or DVR/DVD IN), you cannot view the playback picture on the TV.

About SCART

You can enjoy pictures and sounds from playback components simply by connecting with the SCART cable.

•For an analogue decoder

To watch through or to record a scrambled program on your VCR, connect the analogue decoder to your VCR and select the scrambled channel on your VCR.

If an appropriate terminal for the decoder connection is not equipped for your VCR, connect the decoder to your TV. Refer also to the manuals supplied with these components.

•For T-V LINK

•You can use the T-V LINK function if you connect a T-V LINK compatible TV and VCR to this receiver with a fully wired SCART cables. For details on T-V LINK, refer also to the manuals supplied with the TV and the VCR.

•Connect a SCART cable to EXT-2 terminal on the JVC’s T-V LINK compatible TV for the T-V LINK function.

•Some video components support the data communication like T-V LINK. For complete details, refer also to the manuals supplied with these components.

SCART Terminal Specifications : Available, –: Not available

			Terminal name
		TV	VCR	DVR/DVD
Audio	L/R
Input	Composite
Video	S-video (Y/C)	–
	RGB	–
Audio	L/R	–
Output	Composite	*1	*1	*1
Video	S-video (Y/C)		–	–
	RGB		–	–
T-V LINK		*2	*2	*2
CAUTION:

*1 The signals input from a SCART terminal cannot be output through the same SCART terminal.

*2 The signals for the T-V LINK function are always going through the receiver.

NOTES

•Composite video signals and S-video signals can be converted into all types of signals except RGB. See above for details.

•When you record a playback picture with a DVD recorder or VCR connected to this receiver, perform either one of the below.

–Set the video input setting (see page 20) to a setting other than “S” to transmit composite video or RGB signals to this receiver.

–Set “VIDEO OUTPUT” (see page 33) to “RGB/C” to transmit S-video signals from a playback component to this receiver.

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

9