JVC 1105RYMMDWJEIN DVD recorder or DVD player, Changing the remote control code for DVD recorder

7DVD recorder or DVD player

To operate the DVD recorder, set the mode selector to “DVR.”

To operate the DVD player, set the mode selector to “DVD.”

1 2 3

4 5 6

7 8 9

10 0 10

After setting the mode selector correctly, you can perform the

following operations on the DVD recorder or DVD player.

See the instructions supplied with the DVD recorder or DVD player for details.

7Changing the remote control code for DVD recorder

Some JVC DVD recorders can accept four types of the control signals. You can assign one of four codes to the remote control supplied with this receiver for operating your DVD recorder. For details, refer to the manual supplied with the DVD recorder.

Initial setting: 03

1Set the mode selector to “DVR.”

2Press and hold DVR/DVD .

3Press DVR/DVD.

4Enter the remote control code you want using buttons 1 – 4, and 0.

EX.: To enter the code “2”, press 0, then 2.

Code for DVR	Number to enter
1	01
2	02
3	03
4	04

5Release DVR/DVD .

Now, the remote control code has been changed.

You can always perform the following operation:

DVR/DVD : Turn on or off the DVD recorder or DVD player.

After pressing DVR/DVD, you can perform the following operations on the DVD recorder and DVD player.

3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press 3.
¢:	Skip to the beginning of the next
	chapter.
4:	Return to the beginning of the current
	(or previous) chapter.
DVD MENU:	Display the menu recorded on discs.

After pressing DVR/DVD or DVD MENU, you can perform the following operations on the DVD recorder and DVD player.

5/∞/3/2:	Select an item on the menu screen.
SET:	Enter the selected item, channel
	number, chapter/title number, or track
	number (if required).
Only for DVD recorder operations:
CHANNEL +/–:	Change the channel numbers.
1 – 9, 0:	Select a channel number (while stopped)
	or a chapter/title number, track number
	(while playing back). Press SET to enter
	the number.
+ 3:	Start recording.
+ 8:	Enter recording pause. To start recording,
	press 3.

Only for DVD player operations:

1 – 10, 0, +10: Select a chapter/title number, track number, menu item, etc.

If these buttons do not function normally, use the remote control supplied with your DVD recorder or DVD player. Refer also to the manuals supplied with the DVD recorder or DVD player for details.

52