Selecting the output video signals
To use the video conversion function (see page 9), you need to select this setting according to the connection method for a TV.
VIDEO OUTPUT: HDMI
Select this when connecting a TV with the HDMI cable.
VIDEO OUTPUT: CMPNT
Select this when connecting a TV with the component video cable.
VIDEO OUTPUT: S
Select this when connecting a TV with the SCART cable which receives
VIDEO OUTPUT: RGB/C
Select this when connecting a TV with the SCART cable which receives RGB or composite video signals.
Initial setting: VIDEO OUTPUT: HDMI
NOTE
To transmit the video signals selected in this setting, you need to connect a TV and this receiver with the cable which can transmit the selected video signals.
Superimposing the menus
You can select whether or not to superimpose the
SUPERIMPOSE: ON
Select to superimpose the
SUPERIMPOSE: OFF
Select to cancel superimposition. The
Initial setting: SUPERIMPOSE: ON
NOTES
•Some
•When the video input setting (see page 20) is set to “CMPNT,” the
•The
Setting the Auto Function mode
The source will be selected automatically simply by turning on a video component.
•This function takes effect for the video components connected to the receiver using the SCART
Auto Function mode works as follows:
•When a video component is turned on, the receiver selects the video component as the source (and the TV input is changed automatically).
•When a video component currently selected as the source is turned off, the receiver changes the source to the video source previously
AUTO MODE: AUTO1 Auto Function mode works when the receiver is on.
AUTO MODE: AUTO2 Auto Function mode works whether or not the receiver is on. When the receiver is off, turning on a video component turns on the receiver, then the video component is selected as the source.
AUTO MODE: MANUAL You need to select the source manually.
Initial setting: AUTO MODE: MANUAL
When “AUTO MODE: AUTO1” or “AUTO MODE: AUTO2” is selected, the AUTO MODE indicator lights up on the display.
NOTE
When selecting VCR as the source, only turning on the VCR may not activate “AUTO MODE: AUTO1.” If this happens, you may need to start playback to activate Auto Function mode.
33