When your clapping sound is detected successfully
•On the TV screen, “SUCCESSFUL,” “RESULT,” and the setting values appear. The setting values are shown for about 10
seconds.
Ex.:
*8
SMART SURROUND SETUP
FL+2 C 0 FR+2
+0.3m 
STD 
+0.3m
| SL | SUCCESSFUL SR |
| |||||||||
+2 |
|
|
|
|
|
| +2 |
| ||||
| +0.5m | RESULT |
| +0.5m |
| |||||||
|
|
| +0.6m | +0.6m |
| *9 | ||||||
| ||||||||||||
*10 |
|
|
|
| +4 |
|
| +4 |
|
|
| |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
| SBL | SBR |
| ||||||||
|
|
|
| |||||||||
•On the display, “SUCCESSFUL” appears, then the setting values are shown as follows for about 10 seconds:
Ex.:
*8
*9 *10
FL 
C 
FR 
SR
SBR 
SBL 
SL
*8 Standard channel (the closest speaker).
This speaker position now works as the reference position (“0m/ft”) and other speakers’ distance is shown by the difference with this reference speaker position.
*9 Difference of each speaker position in distance (in meters or feet).
*10 Each speaker’s output level
When finishing displaying the setting values
On the TV screen, “COMPLETED” appears, then “TEST TONE” and “END” appear. On the display, “TEST? END?” appears.
•To adjust the speakers’ output levels manually, press TEST (see page 37).
•To erase the
•The receiver returns to normal operation mode automatically if no operations are done for about 10 seconds.
Ex.:
SMART SURROUND SETUP
FL+2 C 0 FR+2
+0.3m STD +0.3m
SL |
|
| TESTTONE | SR | ||||||
+6 |
|
|
|
|
| END |
|
| +2 | |
+0.5m |
| +0.5m | ||||||||
|
| +0.6m | +0.6m | |||||||
|
| +4 |
|
| +4 |
| ||||
|
|
|
| |||||||
|
| SBL |
| SBR | ||||||
When your clapping sound is not detected correctly
“SETTING UP” appears again after one of the following messages. In this case, repeat step 3.
SILENT: • The receiver detects sound from only the left and right front speakers.
•The receiver detects no sound from the front speakers and detects sound from at least one of
the other speakers.
AGAIN: • The receiver cannot detect sound from the left or right front speaker.
•The receiver fails to calculate the speakers' output level and difference of each speaker's position in distance.
In the following cases, set the speakers manually.
•When “SILENT” appears twice in succession
The setting is partially made. (The distance of the speakers from which sound has not been detected is set to “+9.0m (+30ft).”)
The receiver exits from Smart Surround Setup.
•When “MANUAL” appears
The receiver fails to detect the sound three times. The receiver exits from Smart Surround Setup.
To cancel Smart Surround Setup, press EXIT while “SETTING UP” flashes.
•No other operations can be accepted after “SETTING UP” stops flashing. Complete the Smart Surround Setup.
To check the current setting made by Smart Surround Setup,
press SMART S. SETUP while the receiver is in normal operation mode.
The setting values appear. On the display, the setting values are shown one after another.
•The current setting is not indicated but “MANUAL” appears if you change the following settings after using Smart Surround Setup:
–If you change speaker distance manually.
–If you change one of the speaker sizes either from “NO” to “SMALL” or “LARGE,” or from “SMALL” or “LARGE” to “NO.”
To check the current setting, see each setting item of the speaker distance (see page 29) and the speaker output level (see page 37).
•If you have not used Smart Surround Setup, “NO S.S.S.” appears.
NOTES
•When Smart Surround Setup does not work properly, try measures below:
–set the volume to “0.”
–turn off the components (TV, DVD player, DVD recorder, or subwoofer, for example) near this receiver or the speakers.
•The speaker distance and output level manually set will be applied instead of those set by using Smart Surround Setup in the following cases:
–When you change one of the speaker distances (see page 29).
–When you change one of the speaker sizes either from “NO” to “SMALL” or “LARGE,” or from “SMALL” or “LARGE” to “NO” (see page 28).
•When you want to adjust the speaker distance and output level manually, see pages 29 and 37.
•When the headphone is in use, the receiver returns to normal operation mode without showing “TEST TONE.”
•The speakers which are set to “NO” in the speaker setting (see page 28) are not indicated clearly on the TV screen.
•Do not clap your hands so hard that it may hurt your hands.
24
