Operating other manufacturers’ products | JVC LVT1437-001A specification

Operating other manufacturers’ products

By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers’ products.

•Refer also to the manuals supplied with the other products.

•To operate those components with the remote control, first you need to set the manufacturers’ codes each for the TV, VCR, STB, and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

•All the functions may not be assigned to the buttons in some equipment.

❏Changing the transmittable signals for operating a TV

1Press and hold TV .

2Press TV.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for TV” on the right.

Manufacturers’ codes for TV

Manufacturer	Codes

JVC	01
Akai	02, 05
Blaupankt	03
Daewoo	09, 30, 31
Fenner	04, 30, 31
Fisher	05
Grundig	06
Hitachi	07, 08
Irradio	02, 05
Magnavox	09
Mitsubishi	10, 32
Miver	03
Nokia	11, 33
Nordmende	12, 13, 17, 25, 26, 27
Orion	14
Panasonic	15, 16
Philips	09
Saba	12, 13, 17, 25, 26, 27
Samsung	09, 18, 31
Sanyo	05
Schneider	02, 05
Sharp	19
Sony	20, 21, 22, 23, 24
Telefunken	12, 13, 17, 25, 26, 27
Thomson	12, 13, 17, 25, 26, 27, 29
Toshiba	28

Initial setting: 01

4Release TV .

Now, you can perform the following operations on the TV.

TV :	Turn on or off the TV.
TV VOL +/–:	Adjust the volume on the TV.

TV/VIDEO:	Change the input mode (either TV or
	VIDEO).

After pressing TV, you can perform the following operations on the TV.

CHANNEL +/–:Change the channel numbers.

1 – 9, 0, 100+ (+10): Select the channel numbers.

See the instructions supplied with the TV for details.

5Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If more than one code is listed for your brand of TV, try each

one until the correct one is entered.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

53

Image 57

JVC LVT1437-001A manual Operating other manufacturers’ products, Changing the transmittable signals for operating a TV

Contents

RX-D701S / RX-D702B Important for the U.K Information for Users on Disposal of Old EquipmentIf in Doubt Consult a Competent Electrician European Union Regulatory information Above ALL Precautions Features Table of Contents When operating a DVD player, set the mode selector o to DVD Remote controlParts identification TV, VCR, DVR/DVD, FM/AM, USB, AUX, Video Front panel How to open the front doorInside the front door Press down on PUSH-OPEN See pages in parentheses for details Rear panel Display window Putting batteries in the remote control Before InstallationChecking the supplied accessories Getting started FM antenna connection Connecting the FM and AM MW antennasFM antenna supplied Antenna Speaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwoofer Before connecting video components Connecting video componentsVideo conversion function Hdmi Green Component video cable not supplied Blue Red Connecting a TVTurn off all components before making Connections Red Connecting a DVD recorder or DVD player When you enjoy sound recorded in DVD-Audio Monaural audio cable not supplied Signal currentWhite Stereo audio cable Scart cable not supplied Signal current Connecting a VCRComponent video cable not supplied Hdmi cable not supplied Green Connecting another video component to the Video in jacks Component video cable not suppliedHdmi cable not supplied Connecting a video component to the AUX input jacks How to open the front doorVideo camera, etc Digital audio connection Connecting the power cordTurn off all components before making connections Digital input terminals For USB Terminal USB connection USB drivers are installed automatically How to install the USB driversCheck if the drivers are correctly installed USB Terminal To turn off the power into standby Turn on the powerPress STANDBY/ON or Audio on the remote control Basic operations Selecting the video input setting Adjust the volumeSelecting the audio input setting Hdmi Digital Analog Listening with headphones Selecting the digital decode modeFrom the remote control only Press Dimmer repeatedly Turning off the sounds temporarily Basic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Making sounds natural Press and hold Smart S. Setup until Setting UP flashes Basic settings SBR SBL SL From the remote control Basic setting itemsOperation through on-screen display menus Menu operation buttons See Setup menu configuration Button indications on the screen Menu operating procedureTo select the desired submenu, press 5 or ∞ repeatedly Usable buttons and their functions Setting the speakers Setting the itemsSetting subwoofer information-SUBWOOFER Press SET Setting the speaker distance Setting the surround back speakersInitial setting S Back OUT 2SPK Speaker distance Setting bass sound Activating the EX/ES/PLIIx setting-EX/ES/ PLIIxSetting subwoofer output-SUBWFR OUT Selecting the main or sub channel Setting the low frequency effect attenuator Using the Midnight mode-MIDNIGHTSetting the crossover frequency-CROSSOVER Midnight OFF Memorizing the volume level for each source-ONE Touch OP Setting the Audio delay level Selecting the output video signals Setting the Auto Function modeSuperimposing the menus Basic adjustment items Sound adjustments Adjust Menu To select the desired submenu, press Or ∞ repeatedly To start the adjustment, press Adjusting the items Adjusting the speaker output levelsPress Test to check the speakers’ output balance Adjusting the bass sounds Adjusting the sound parameters for the Surround/DSP modesAttenuating the input signal-INPUT ATT Adjusting the virtual room size for DSP modes Adjusting the center tone-CENTER Tone Adjusting the liveness effect for DSP modes Using preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operations To tune in a preset station Selecting the FM reception mode What information can RDS signals provide? Using the Radio Data System RDS to receive FM stationsRDS indicator Press Display while listening to an FM station Searching for a program by PTY codes To search for a program using the PTY codesPTY codes Press PTY Search while listening to an FM station Description of the PTY codes TA News Info TA/NEWS TA/INFO TA Traffic Announcement in your areaDisplay Reproducing theatre ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby Digital DTS About other digital signals 3D Headphone mode All Channel Stereo mode ALL CH StereoIntroducing the DSP modes Digital Acoustic Processor DAP modes About the DSP modes Using the Surround/DSP modesVirtual Surround Back Auto From the remote control Select and play any source When you select Auto SurroundTurn Multi JOG to select the Surround/DSP mode you want Selecting the Surround/DSP modes VCR Operating other JVC productsChannel + REW DVD recorder or DVD player Changing the remote control code for DVD recorderRelease DVR/DVD DVD Menu Operating other manufacturers’ products Changing the transmittable signals for operating a TVManufacturers’ codes for TV Release TV Release VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCR Changing the transmittable signals for operating a STB Power TroubleshootingProblem Possible Cause Solution Sound and picture Correct antenna Remote control Tuner Amplifier SpecificationsFM tuner IHF AM MW tuner 1105RYMMDWJEIN Victor Company of Japan, Limited