JVC LVT1437-001A, 1105RYMMDWJEIN manual Changing the transmittable signals for operating a STB

❏Changing the transmittable signals for operating a STB

1Press and hold STB .

2Press STB CONT.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for STB” below.

4Release STB .

Now, you can perform the following operation on the STB.

STB : Turn on or off the STB.

After pressing STB CONT, you can perform the following operations on the STB.

CHANNEL +/–:Change the channel numbers on the STB.

1 – 9, 0, +10:Select the channel numbers on the STB.

See the instructions supplied with the STB for details.

5Try to operate your STB by pressing STB .

When your STB turns on or off, you have entered the correct

code.

If more than one code is listed for your brand of STB, try each

one until the correct one is entered.

Manufacturers’ codes for STB

Manufacturer	Codes
JVC	01, 02
Amstrad	03, 04, 05, 06, 31
BT	01
Canal Satellite	20
Canal+	20
D-Box	24
Echostar	17, 18, 19, 21
Finlux	11
Force	28
Galaxis	27
Grundig	07, 08
Hirschmann	07, 17, 37
ITT Nokia	11
Jerrold	16
Kathrein	13, 14, 34
Luxor	11
Mascom	32
Maspro	13
Nokia	24, 26, 33
Pace	10, 25, 31
Panasonic	15
Philips	09, 23
RFT	12
Saba	35
Sagem	22, 29
Salora	11
Selector	29
Skymaster	12, 36
Thomson	35
TPS	22
Triax	30
Wisi	07

Initial setting: 01

❏Changing the transmittable signals for operating a DVD player

1Set the mode selector to “DVD.”

2Press and hold DVR/DVD .

3Press DVR/DVD.

4Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for DVD player” below.

5Release DVR/DVD .

Now, you can perform the following operation on the DVD player.

DVR/DVD : Turn on or off the DVD player.

3:	Start playback.
4:	Return to the beginning of the current
	chapter (or fast-forward for some
	models).
¢:	Skip to the beginning of the next chapter
	(or fast-reverse for some models).
7:	Stop playback.
8:	Pause playback.
DVD MENU:	Display the menu recorded on DVD
	VIDEO discs.
1 – 9, 0, +10:	Select the chapter number.

After pressing DVR/DVD or DVD MENU, you can perform the following operations on the DVD player.

5/∞/3/2: Select an item on the menu screen.

SET:Enter the selected item.

See the instructions supplied with the DVD player for details.

6Try to operate your DVD player by pressing DVR/DVD .

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes for DVD player

Manufacturer	Codes
JVC	01
Kenwood	02, 03
Mitsubishi	06
Panasonic	07
Philips	05
Pioneer	08
Sony	09
Toshiba	04
Yamaha	10

Initial setting: 01

If more than one code is listed for your brand of DVD player,

try each one until the correct one is entered.

NOTE

You cannot use this remote control to operate other manufacturers’ DVD recorder.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

55