JVC LVT1437-001A, 1105RYMMDWJEIN manual 7Connecting a DVD recorder or DVD player

Do not connect the AC power plug to the wall outlet until all connections are completed.

7Connecting a DVD recorder or DVD player:

Turn off all components before making connections.

Component video cable (not supplied)

Green

COMPONENT VIDEO

HDMI cable (not supplied)

Blue

Red

Y

PB

) IN DVR/DVD IN

PR

VIDEO(VCR) IN DVR/DVD IN MONITOR OUT HDMI

Å	ı	DVD recorder or
		DVD player

AUDIO VIDEO IN

DVR/DVD

L

R

Ç Î

DVR/DVD IN	White
FRONT
	Red

Stereo audio cable (not supplied)

SCART cable (not supplied)

Select the appropriate VIDEO INPUT (see page 20) according to the connection you have made. If you do not, you cannot view the playback picture on the TV.

Available video input setting for each video output setting:

: Available	–: Not available
VIDEO			VIDEO INPUT
OUTPUT	HDMI	CMPNT	S	C	RGB
HDMI					–
CMPNT	–				–
S	–	–			–
RGB/C	–	–

NOTES

: signal current

ÅTo HDMI output

ıTo component video output

•Connect Y, PB, and PR correctly. Ç To left/right audio channel output Î To SCART terminal

•Do not connect different components to the AUDIO DVR/DVD IN jacks and AV IN/OUT (SCART) DVR/DVD terminal; otherwise, sounds from both components come out of the speakers at the same time.

•When playing back audio and video with the HDMI connection, the HDMI lamp on the front panel lights up.

•Select the audio and video input setting according to the connection method. See page 20 for details.

•Set the audio input setting to “HDMI” when you enjoy sound with the HDMI connection. See “Selecting the audio input setting” on page 20.

•By using a HDMI-DVI conversion cable, you can connect the source components or the TV with DVI output. When connecting those components or TV, change the audio input setting to the setting other than “HDMI.” (See page 20.)

•In addition to using the HDMI cable, you can enjoy digital sound as well using a digital audio cable (coaxial or optical). When shipped from the factory, the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)) on the rear of the receiver is set for a DVD recorder and DVD player. For details of digital audio connection, see page 16.

•If your DVD recorder or DVD player is equipped with the analogue multi channel output terminals, you can enjoy the sound recorded in DVD-Audio by connecting your DVD recorder or DVD player to DVD MULTI IN jacks. See page 12 for details.

When you enjoy the sound recorded in DVD-Audio with HDMI connection, see “When you enjoy sound recorded in DVD-Audio...” on page 12.

•When enjoying multi channel PCM sound with the audio input setting set to “HDMI” (see page 20), some functions are not available. See page 12 for details.

11