Basic operations
1 |
| 2 | 3 |
Source lamps |
| ||
|
| 1 |
|
|
| 2 |
|
|
| 3 |
|
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 |
|
10 | 0 | 10 |
|
1 Turn on the power
Press 
STANDBY/ON (or 
AUDIO on the remote control).
The standby lamp goes off and the source lamp of the current
source lights in red.
Current source name appears.
ANALOG | AUTO SURR | TUNED STEREO AUTO MUTING |
LR
S.WFR
MHz
2 Select the source to play
On the front panel:
Turn SOURCE SELECTOR until the source name you want appears on the display.
The source lamp corresponding to the selected source lights in
red.
•As you turn SOURCE SELECTOR, the source changes as follows:
ANALOG | AUTO SURR | TUNED STEREO AUTO MUTING |
LR
S.WFR
MHz
DVR/DVD 
VCR 
VIDEO 
TV 
USB WIRELESS
USB TERMINAL
FM 
AM 
AUX 
(Back to the beginning)
DVR/DVD: | Select this for the DVD recorder or DVD |
| player. |
VCR: | Select this for the VCR. |
VIDEO: | Select this for the component connected |
| to the VIDEO IN jacks on the rear of the |
| receiver. |
TV: | Select this for the TV. |
USB WIRELESS: | Select this for the PC component using |
| a wireless equipment. |
USB TERMINAL: | Select this for the PC component. |
FM: | Select this for an FM broadcast. |
AM: | Select this for an AM (MW) broadcast. |
AUX: | Select this for the component connected |
| to the AUX jacks on the front panel |
| (inside the front door). |
|
|
From the remote control:
Press one of the source selecting buttons.
•For “USB WIRELESS” and “USB TERMINAL,” press USB. Each time you press USB, the mode alternates between “USB WIRELESS” and “USB TERMINAL.”
•For “FM” and “AM,” press FM/AM. Each time you press FM/AM, the mode alternates between “FM” and “AM.”
NOTE
When connecting a video component to HDMI VIDEO (VCR) IN terminal or COMPONENT VIDEO (VCR) IN jacks, “VCR” and “VIDEO” are assigned for the source you have selected in “HDMI SELECT” and “CMPNT SELECT” (see page 32).
To turn off the power (into standby)
Press 
STANDBY/ON (or 
AUDIO on the remote control) again.
The standby lamp lights in red.
NOTES
•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.
•Turning a source component on before turning the receiver on may cause a noise or interrupt the sound and picture. In this case, turn both the source component and the receiver off, then turn the receiver on before turning the source component on.
19
