Controls and Features (cont.)

Control Panel

STAND BY

1

 

2

 

3

LAMP

4

TEMP

5

EMERGENCY

6

VIDEO

7

COMPUTER

8

SETTING

9

+3

 

QUICK

p

ALIGN

-2

 

1STAND BY Indicator

ON : When in stand-by mode.

Blinking : When in cool-down mode.

4Lamp indicator

ON

: After the light-source lamp has been used for

 

more than approx. 900 hours.

Blinking : Replace the lamp. Refer to “Replacing the Light- Source Lamp” on page 61.

5TEMP indicator

ON: The temperature inside the projector has abnormally risen.

Note

•While the TEMP indicator is on (during abnormal temperature), the power is automatically cut off, and an emergency mode is shown (with the EMERGENCY indicator blinking).

6EMERGENCY indicator

Blinking: Something abnormal has occurred with the projector.

Memo

About the emergency mode:

The emergency mode is shown when the following anomalies have occurred with the projector (the EMERGENCY indicator blinks). In the emergency mode, projection is automatically interrupted and the cooling fans operate for about 20 seconds.

•When the air filter is displaced.

•When the filter is clogged.

•When the light-source lamp has suddenly gone off.

•When the fans have stopped.

•When the temperature inside has risen abnormally high.

Memo

About the cool-down mode:

This projector has a function to cool down the heated lamp for a fixed period of time (approx. 120 seconds) after projection is finished. This feature is referred to as the cool-down mode.

CAUTION

•The purpose of the cool-down mode is to prevent inner parts from being deformed or broken by heat from the heated lamp as well as to prolong the life of the lamp. Do not turn off the main power switch while in the cool-down mode. Also, do not place the projector on its side or stand it upright; this may block the exhaust vents.

2OPERATE indicator

ON: When the projector is in operation (projecting)

3OPERATE button

When the projector is in the stand-by mode, press this button one second or more, and the main power switch is turned on, causing the OPERATE indicator to light. Press it one second or more again, and the projector goes into the cool-down mode, then stand-by mode.

Memo

While in the cool-down mode:

If you press the OPERATE button, the projector is not tuned on.

CAUTION

• When an emergency mode is shown:

After the cooling fans have stopped, turn off the main power switch and unplug the power cord from the wall outlet. Make sure the lamp-replacement cover and the air filter are correctly installed. Then, plug in the power cord again and operate the projector.

If it goes into an emergency mode again, after the cooling fans have stopped, turn off the main power switch, unplug the power cord, and call your dealer for repair.

ENGLISH

9

Page 9 Page 11
Page 10
Image 10
JVC DLA-G20U manual Control Panel
Page 9 Page 11

DLA-G20U specifications

The JVC DLA-G20U is a high-performance professional D-ILA projector designed for serious cinema enthusiasts and commercial applications. Renowned for its exceptional picture quality and advanced technology, it boasts a host of features that cater to the most discerning users.

At the heart of the DLA-G20U is its D-ILA (Direct Drive Image Light Amplifier) technology, which is known for producing stunningly accurate color reproduction and extraordinary contrast. This projector incorporates a native resolution of 1920 x 1080 pixels, allowing for full HD viewing that captures every detail with remarkable clarity. The D-ILA panels are also designed to minimize motion blur, providing smooth and fluid visuals for fast-paced action sequences.

One of the standout characteristics of the DLA-G20U is its impressive contrast ratio, which typically exceeds 50,000:1. This high contrast allows for deep blacks and bright whites, enhancing the overall viewing experience by ensuring that subtle details in dark scenes are easily discernible. The projector features sophisticated native 4K upscaling, enabling it to enhance lower resolution content for a sharper, more detailed image, making it versatile for various media types.

Additionally, the DLA-G20U is designed with a robust optical system that includes a high-quality glass lens with a large aperture. This ensures excellent brightness and uniformity across the screen. The projector delivers up to 1500 lumens of brightness, making it suitable for both dark and moderately lit environments.

The connectivity options of the DLA-G20U are impressive, featuring multiple HDMI inputs and additional support for 3D HDMI, which allows it to easily integrate into a range of setups.

For user convenience, the DLA-G20U includes an intuitive on-screen menu system and features customizable settings, allowing users to fine-tune picture quality based on their specific preferences and room conditions.

In terms of maintenance, the projector boasts a long lamp life, reducing the need for frequent replacements. Its sleek design also fits seamlessly into any home theater or commercial space.

Overall, the JVC DLA-G20U stands out as a top-tier D-ILA projector, combining cutting-edge technology, superior image quality, and user-friendly features, making it an exceptional choice for those seeking a premium viewing experience.
Top Page Image Contents