JVC DLA-G20U manual Basic Operations, Turning on the Power, Turn on the MAIN POWER switch

Basic Operations

■Projector’s buttons

STAND BY	STAND BY indicator
	OPERATE indicator
LAMP	OPERATE button
TEMP	2, 1
EMERGENCY
VIDEO	MAIN POWER switch 1, 2
COMPUTER

SETTING

+3

QUICK

ALIGN

-2

■Remote control unit

The following describes the basic procedure for normal use of the projector.

1.Turning on the Power

1 Turn on the MAIN POWER switch.

ON [ ❙ ]:The main power turns on and the STAND BY indicator comes on.

Projector’s indicator

STAND BY

(ON)

2Press the OPERATE button for one second or more.

•The OPERATE indicator comes on.

•About 30 seconds after the MAIN POWER switch is turned on, you can start projecting.

	Projector
Remote control unit
OPERATE	(ON)
or	OPERATE

Notes

•After the power is turned on, the screen may be jumbled for a few seconds, but this is not a malfunction.

•If the light-source lamp does not light up, try to press the OPERATE button for more than a second again.

■Turning off the Power

1Press the OPERATE button for one second or more.

•The STAND BY indicator changes to blinking, and the projector goes into cool-down mode.

Example of the projector’s button Projector

(Blinking)

OPERATE	COMPUTER	VIDEO
	T
VOL.	ZOOM	FOCUS
	W
PAGE	MENU/ENTER
BACK
PRESET
QUICK		AV
ALIGN.		MUTING

Touche OPERATE

2, 1

(ON)	\
OPERATE		STAND BY

2Turn off the MAIN POWER switch after the STAND BY indicator

changes to steady on.

OFF [‡]: The MAIN POWER switch turns off and the STAND BY indicator goes off.

Projector

(OFF)

STAND BY

*Do not turn off the MAIN POWER switch during cool down mode (the STAND BY indicator blinking). Turn it off after the STAND BY indicator becomes on (stand- by mode).

26