JVC DLA-G20U manual Installing the Projector, Precautions for Installation, English

Installing the Projector

Precautions for Installation

CAUTION

Do not install the projector in the following places :

•There is much water, humidity or dust.

•The projector may be subjected to oil smoke or cigarette smoke.

•On a soft surface such as a carpet or cushion.

•The projector may be subjected to direct sunlight.

•Temperature is high or humidity is low.

Allowable operation temperature range: + 5°C to + 35°C (41°F to 95°F)

Allowable relative humidity range:	20% to 80% (no condensation)
Allowable storage temperature range:	–10°C to +60°C (14°F to 140°F)

■When installing the projector, observe the followings:

• Do not use the projector placed on its side.

Avoid using the projector placed on its side. This could cause a malfunction.

• Use the projector within the installed angle.

Avoid using the projector inclined ±30° or more right-to-left or left-to-right. This could cause color variation or harm the lamp life.

• Do not block the exhaust vents.

Do not use a cover which encloses the projector air-tight or blocks the exhaust vents. Allow sufficient space around the projector. When the projector is enclosed in a space of the following dimensions, use an air conditioner so the temperature inside becomes equal to the outside temperature.

Allowable minimum space required

	30cm (11 - 13/16”)
20cm (7 - 7/8”)	60cm (23 - 5/8”)

ENGLISH

30cm (11 - 13/16”)

20cm (7 - 7/8”)

15