Controls and Features (cont.)

Connector Panel (Cont.)

 

 

w

1

2

 

 

 

AUDIO

Y/C

VIDEO

 

 

 

 

 

 

q

PC

 

 

 

 

 

 

 

 

 

p

 

 

 

 

 

 

 

AUDIO

AUDIO

 

 

 

 

 

 

 

 

R

 

L

Y

 

9

G

H/CS

R

PB/B-Y

3

 

B

V

 

PR/R-Y

 

 

COMPUTER

 

 

 

4

 

OUT

 

 

 

 

 

 

REMOTE

AUDIO OUT

 

 

 

RS-232C

 

 

 

 

8

7

6

5

 

9 COMPUTER IN (computer input) -2 terminal (BNC)

q COMPUTER IN (computer input) -1 terminal (D-sub 3-

These are input terminals for analog RGB signals, vertical sync (V) signals, and horizontal sync (H) signals / composite signals(Cs). Devices which have analog RGB signal output terminals can be connected.

*Input of external sync signals is automatically detected.

Detection of H/V signals or Cs signals causes automatic switch to external sync. The priority order is H/V > Cs.

Note

DTV-format (480i, 480p, 720p, 1080i) signals can be input. When the source is set to “AUTO”, signals of 480i and 1080i can automatically be detected, but 480p and 720p signals can not be detected.

To be able to input 480p or 720p signal, the source should be set to a dedicated source mode “SDTV(480p)” or “HDTV(720p)”. For setting the source, refer to “Changing (setting) the source” on page 47.

CAUTION

When computer-related signals are input, the uppermost edge of the screen may appear bowing if the sync signal input is composite sync (Cs) or G on sync signal. In that case, use separate sync signals for vertical sync (V) and horizontal sync (H).

pAUDIO input terminal (stereo mini jack)

This is an audio input terminal for COMPUTER IN (computer input) -2 terminal. Connect the audio output signal of a device connected to COMPUTER IN (computer input) -2 terminal.

*When input to COMPUTER -2 is selected, the audio signal input is reproduced by the projector’s speakers. Also, signals can be output from the AUDIO OUT (audio output)

terminal.

(However, if a cable is connected to AUDIO OUT (audio output) terminal, audio sound does not come out from

12the projector’s speakers.)

row 15 pin)

This is an input terminal (PC) dedicated for computer signals (RGB video signals and sync signals).

Connect the display output terminal of the computer to this terminal. When a Macintosh computer is to be connected, use the Conversion adapter for Mac supplied.

CAUTION

When computer-related signals are input, the uppermost edge of the screen may appear bowing if the sync signal input is composite sync (Cs) or G on sync signal. In that case, use separate sync signals for vertical sync (V) and horizontal sync (H).

wAUDIO (audio) input terminal (stereo mini jack)

This is an audio input terminal for COMPUTER IN (computer input) -1 terminal. Connect the audio output signal of a device connected to COMPUTER IN (computer input) -1 terminal.

*When input to COMPUTER -1 is selected, the audio signal input is reproduced by the projector’s speakers. Also, signals can be output from the AUDIO OUT (audio output) terminal.

(However, if a cable is connected to AUDIO OUT (audio output) terminal, audio sound does not come out from the projector’s speakers.)

Page 13
Image 13
JVC DLA-G20U Input of external sync signals is automatically detected, Audio input terminal stereo mini jack, Row 15 pin

DLA-G20U specifications

The JVC DLA-G20U is a high-performance professional D-ILA projector designed for serious cinema enthusiasts and commercial applications. Renowned for its exceptional picture quality and advanced technology, it boasts a host of features that cater to the most discerning users.

At the heart of the DLA-G20U is its D-ILA (Direct Drive Image Light Amplifier) technology, which is known for producing stunningly accurate color reproduction and extraordinary contrast. This projector incorporates a native resolution of 1920 x 1080 pixels, allowing for full HD viewing that captures every detail with remarkable clarity. The D-ILA panels are also designed to minimize motion blur, providing smooth and fluid visuals for fast-paced action sequences.

One of the standout characteristics of the DLA-G20U is its impressive contrast ratio, which typically exceeds 50,000:1. This high contrast allows for deep blacks and bright whites, enhancing the overall viewing experience by ensuring that subtle details in dark scenes are easily discernible. The projector features sophisticated native 4K upscaling, enabling it to enhance lower resolution content for a sharper, more detailed image, making it versatile for various media types.

Additionally, the DLA-G20U is designed with a robust optical system that includes a high-quality glass lens with a large aperture. This ensures excellent brightness and uniformity across the screen. The projector delivers up to 1500 lumens of brightness, making it suitable for both dark and moderately lit environments.

The connectivity options of the DLA-G20U are impressive, featuring multiple HDMI inputs and additional support for 3D HDMI, which allows it to easily integrate into a range of setups.

For user convenience, the DLA-G20U includes an intuitive on-screen menu system and features customizable settings, allowing users to fine-tune picture quality based on their specific preferences and room conditions.

In terms of maintenance, the projector boasts a long lamp life, reducing the need for frequent replacements. Its sleek design also fits seamlessly into any home theater or commercial space.

Overall, the JVC DLA-G20U stands out as a top-tier D-ILA projector, combining cutting-edge technology, superior image quality, and user-friendly features, making it an exceptional choice for those seeking a premium viewing experience.