JVC DLA-G20U manual Connecting to Video Devices, Connecting to Hi-Vision Devices, Video devices

Connecting to Various Devices (Cont.)

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.

•Read the manual which comes with each video device thoroughly.

•Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.

	S video cable
To Y/C	(separately available)

Video devices

• VCR (Video Cassette recorder)

V

VIDEO

AUDIO

Y

PB/B-Y

PR/R-Y

REMOTE AUDIO OUT

BNC-RCA conversion plug (accessory) To VIDEO

To AUDIO (L)

To AUDIO (R)	AV connection
	cable
	(accessory)

• Laser video disc player

• Camcorder

To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

Memo

•When connecting a video device, use a TBC along with it, or one which has a built-in TBC.

•Use of an extension cable to connect a video device and the projector could cause video degradation.

•When a signal with much jitter is reproduced on a VCR or special- effect playback is performed, the upper part of the picture or the picture itself may be erased or distorted.

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.

•Read the manual which comes with each Hi-Vision device thoroughly.

•Use separately available BNC cables and audio cables to connect Hi-Vision devices.

Y/C	VIDEO
AUDIO
L
R	/B-Y
V	-Y
REMOTE	AUDIO OUT

Hi-Vision devices

To AUDIO (R)

To AUDIO (L)	• W-VHS VCR
Audio cable
(separately available)
To VIDEO	• Text/video camera
To Y
To PB/B-Y
To PR/R-Y
BNC cable (separately available)	• Hi-Vision video camera

RS-232C

To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

Memo

•Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected. (*DVD: Digital Video Disc)

•DTV-format signals (480i, 480p,720p,1080i) can be input. For DTV- format signals that can be handled, refer to page 69.

20