Started Getting
.
0If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. Replace the batteries with new ones (AAA).
0Insert the batteries according to the t s marks. Be sure to insert the s end first.
0If an error occurs while using the remote control, remove the batteries and wait for five minutes. Load the batteries again and operate the remote control.
Effective Range of Remote Control UnitWhen aiming the remote control toward the sensor on this unit (front or rear), ensure that the distance to the sensor is within 7 m.
If the remote control fails to work properly, move closer to this unit.
This unit
30° 
30°
20°
20°
Remote Control
.
Ensure that the total of distance A (between this unit and the screen) and distance B (between the remote control and the screen) is within 7 m.
*As the efficiency of signals reflected from the remote control unit varies with the type of screen used, the operable distance may decrease.
| Screen | |||
| 30° |
| ||
|
| |||
20° |
|
| 30° | This unit |
| ||||
|
|
| ||
20° |
|
| A | |
|
|
|
| |
B
Remote Control
.
CAUTION
0Do not put the remote control in a place with an exposure to direct sun light or high temperature.
It may deformed due to heat, or the internal components may be adversely affected resulting in fire hazard.
0Remove the batteries from the remote control when storing the remote control.
Storing the remote control for a prolonged period without removing the batteries can cause battery leakage.
18