Reducing the After-image of Fast-moving Images (Clear Motion Drive (C.M.D.))

Optimal interpolation according to the content is made possible with the new high-definition image interpolation technique that supports 3D images.

For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.

Original Image

Interpolation Enabled

 

Intermediate Frame Generation

Intermediate Frame Generation

.

Adjust/Set

1Press the [C.M.D.] button

0 Pressing the [C.M.D.] button each time switches the mode in the following

sequence: “Off”"“Low”"“High”"“Inverse Telecine”"“Off”...

INPUT

Setting

Description

Off

Interpolation is not performed.

Low

Softens the image quality.

High

Image quality becomes softer than that of the “Low” setting.

Inverse Telecine

60i/60p video images such as those of TVs and DVDs.

 

Suitable for original images that are 24-frame film sources.

0Does not function for 24p video images.

* C.M.D. is the abbreviation for Clear Motion Drive.

*The [C.M.D.] button is positioned differently on the remote control depending on the model in use. (p. 17)

Viewing High Contrast Images (Lens Aperture)

JVC has developed an image analysis algorithm, which analyzes the state of the video image in real time, and controls the aperture dynamically according to the image information.

This technology enables viewers to enjoy video images with enhanced contrast.

INPUT

1Press the [LENS AP.] button

Pressing the [LENS AP.] button each time switches the setting in sequence.

Setting

Description

Auto 1

Image contrast is enhanced.

Auto 2

Places emphasis on the gradation.

Manual

Does not perform dynamic control.

 

Select this setting to perform adjustment manually.

*1 Manual adjustment is disabled in the “Auto 1” and “Auto 2” setting. To perform adjustment manually, select “Manual”.

*2 When the setting is changed to Auto after performing manual adjustment, the value set manually will be used as the aperture value for Auto.

44