Viewing Videos
STANDBY/ON LAMP WARNING
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
| 1 |
|
|
| ||||||
|
|
|
|
|
|
| ||
|
|
|
2
INPUT 
PHOTO 
MEMO
0 When you are using Q, be sure to remove the lens cover.
0 Connect the power cord, and ensure that the “STANDBY/ON” indicator lights up in red.
1 Turn on the power
Remote control: press the C [ON] button
Projector unit: press the A [STANDBY/ON] button
0The “STANDBY/ON” indicator light switches from red to green (light goes off after the unit starts up).
0(SR) The motorized lens cover opens.
“STANDBY/ON” lights up (red) | “STANDBY/ON” lights up (green) | ||||||||
|
| In standby state |
| During lamp startup | |||||
S |
|
| Y/ON LAMP | WARNING |
|
|
| Y/ON LAMP | WARNING |
TA | NDB | S | TA | NDB | |||||
.
2Choose the image to project
Pressing the [INPUT] button on the projector unit or remote control each time switches the input mode as follows.
HDMI 1 
HDMI 2 
.
0Play back the selected device to project the image.
To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control
0The “STANDBY/ON” indicator light starts to blink in green.
0Press the [HIDE] button again to resume display of the image.
0The power cannot be turned off when the image is temporarily hidden.
Operate
25