About the analysis screen

Pressing the [P.ANALYZER] button on the remote control displays the analysis screen. The operation varies with the state of the OSD.

1Press the [P.ANALYZER] button

The frequency components of the input image are displayed.

.

0The frequency components are distinguished using different colors.

0When setting the “Original Resolution” manually, select “4K” if high-frequency components constitute the majority, and a lower resolution if there are more low-frequency components.

 

Red Orange Yellow

Green

Cyan Blue Purple

Frequency

Low

 

 

 

High

 

 

 

 

 

 

 

 

 

.

Adjust/Set

2Make adjustments while looking at the analysis screen

A Press the [MPC] button to display the adjustment menu

You can also perform setting from “Picture Adjust”"“MPC Level” in the menu.

B Make adjustments according to your preference based on the setting of the selected “Picture Mode”*

0With the analysis screen displayed, selecting “Enhance” displays the area in “cyan” where the “Enhance” effect is applied.

Pressing the [P.ANALYZER] button while “Enhance” is selected also displays the area.

0With the analysis screen displayed, selecting “Dynamic Contrast” displays the area in “yellow” where the “Dynamic Contrast” effect is applied.

Pressing the [P.ANALYZER] button while “Dynamic Contrast” is selected also displays the area.

0With the analysis screen displayed, selecting “Smoothing” or “NR” displays the area in “magenta” where the “Smoothing” or “NR” effect is applied.

Pressing the [P.ANALYZER] button while “Smoothing” or “NR” is selected also displays the area.

* You can make adjustments with the analysis screen displayed. Increasing the value enhances the effect and the color displayed is darker.

3Press the [P.ANALYZER] to exit the analysis screen

40