3Turn off the power

Remote control: press the B [STAND BY] button

Projector unit: press the A [STANDBY/ON] button

0While the “Are you sure you want to turn off?” message is displayed, press the button again.

0The lamp turns off, and the “STANDBY/ON” indicator switches from a green light to a red blinking light.

0After the light goes off, the fan will run for about 100 seconds to cool down the lamp (Cool-down mode). Do not disconnect the power cable while cooling is in progress.

0After about 100 seconds, the “STANDBY/ON” indicator switches from a blinking red to a solid red light.

“STANDBY/ON” blinking (red)

“STANDBY/ON” lights up (red)

In the Cool-down mode

 

 

In standby state

STANDBY/ON LAMP

WARNING

S

 

 

Y/ON LAMP

WARNING

TA

NDB

Operate

.

0(Q) Attach the lens cover.

0(SR) The motorized lens cover closes.

CAUTION

0The power cannot be turned off within approximately 60 seconds after it has been turned on.

0After the light goes off, the fan will run for about 100 seconds to cool down the lamp (Cool-down mode). Do not disconnect the power cable while cooling is in progress.

0The power cannot be turned on again while cooling is in progress (100 seconds).

0Pull out the power plug when the unit is not to be used for a prolonged period of time.

26