Replacing the Lamp
The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit.
0When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by the indicator. (p. 78)
Lamp Replacement Procedure
CAUTION
0Do not insert your hands into the opening of the lamp. This could cause significant deterioration in the performance of the equipment, or lead to injury and electric shock.
0Do not replace the lamp immediately after the unit has been used. Allow a cooling period of at least one hour before replacement. The temperature of the lamp is still high, and may cause burn injuries.
0Do not subject the lamp unit to shock. Doing so may cause lamp blowout.
0Do not use a flammable air duster to clean the internal parts of the unit. Doing so may cause fire.
0Use only genuine replacement parts for the lamp unit. Also, never attempt to reuse an old lamp unit. This may cause the unit to malfunction.
0Do not touch the surface of a new lamp. Doing so may shorten the lamp life and cause lamp blowout.
0When replacing the lamp, be careful not to injure yourself as the lamp may be broken.
0When replacing the lamp of a projector suspended from the ceiling, work at height is required. This is a dangerous operation. Please consult our service center.
1 Pull out the power plug from the power outlet
2Remove the lamp cover
0Remove the screw of the lamp cover with a t screwdriver.
.
3Loosen the screws of the lamp unit
0Loosen the screws with a t screwdriver.
.
4Pull out the lamp unit
0Grasp the handle and pull out the lamp unit.
Handle | Maintenance |
|
.
61