Connecting the Projector

up Set

0Do not turn on the power until connection is complete.

0The connection procedures differ according to the device used. For details, please refer to the instruction manual of the device to be connected.

0This projector is used for projecting images. To output the audio of connected devices, please connect a separate audio output device, such as an amplifier or speaker.

0The images may not be displayed depending on the devices and cables to be connected. Use only HDMI cables (sold separately) that are HDMI-certified.

0Some cables cannot be connected to this unit due to the size of their connector cover.

Connecting to the HDMI Input Terminal (Digital Input)Connecting via HDMI cable

This Unit

Laptop, etc.

 

 

BD/DVD Recorder, etc.

To [HDMI 1] or [HDMI 2] input

terminal

HDMI Output Terminal HDMI Cable (Sold Separately)

.

0If noise occurs, move the laptop away from this unit.

0For a transmission bandwidth in compliance with the HDMI standard, a 340 MHz cable is recommended. When using a cable with a bandwidth of 75 MHz, you are recommended to set the resolution of the equipment transmitting the video to 1080i or lower.

0If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting equipment.

0If the source device is connected to the projector through an intermediate device such as an AV amplifier or divider, the video image may not appear depending on the specifications of the intermediate device.

In this case, connect the source device directly to the projector, and check whether the video image is displayed.

Connecting via HDMI-DVI conversion cable

Desktop PC, etc.

This Unit

To [HDMI 1] or [HDMI 2] input terminal

DVI Output Terminal

HDMI-DVI Conversion Cable (Sold Separately)

.

0If noise occurs, move the desktop PC away from this unit.

0If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting equipment.

22