Glossary of Network Terminology

DHCP

: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network

IP Address

to assign an IP address automatically to the connected device.

: Numeric characters for identifying the device that is connected to the network.

Subnet Mask

: Numeric characters that define the bit count used for the network address that is a

Default Gateway

segment of the IP address.

: Server for communicating beyond the network that is divided by the subnet mask.

MAC Address

: Abbreviation for Media Access Control address. This is a number that is unique to each

 

network adapter. Each of the network adapters is assigned with a unique MAC address.

Remote Code

For changing the remote control code.

0You need to configure the remote control according to the settings of this unit.

On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to switch the code.

0The backlight of the remote control blinks 3 times: change the remote control code to “A”

0The backlight of the remote control blinks 2 times: change the remote control code to “B”

Setting

Description

A

Change the remote control code from “B” to “A”.

B

Change the remote control code from “A” to “B”.

Adjust/Set

Lamp Reset

For resetting the lamp time to “0”.

Æ“Resetting the Lamp Time”（p. 63）

Information

Setting

 

Description

Input

Displays video input terminal.

Source

Displays the input source.

(Displayed only during video signal input)

 

 

Resolution

Displays the image resolution.

(Displayed only during PC signal input)

 

 

H Frequency

Displays the horizontal frequency.

(Displayed only during PC signal input)

 

 

V Frequency

Displays the vertical frequency.

(Displayed only during PC signal input)

 

 

Deep Color

Displays the color bit depth of the input video signal.

 

0

Not displayed when YCbCr(4:2:2) is input.

 

0

Displayed when Deep Color information is received from the source device.

Color Space

Displays the color space of the input signal.

Lamp Time

Displays the lamp time.

Soft Ver.

Displays the firmware version.

PS Ver.

Displays the version of image quality data.

60