110 EN

 

TROUBLESHOOTING (cont.)

RECORDING

 

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

The desired programme cannot be

● The channel position does not

Set the correct channel position for the

 

recorded.

correspond to that in the receiving area.

receiving broadcast. ( pg. 98)

 

 

 

 

2.

Recording and editing cannot be

● No disc or a disc not being compatible

Load a recordable disc on the unit.

 

made.

with the unit is loaded.

( pg. 5)

 

 

● The disc loaded is not formatted.

Format the disc. ( pg. 106)

 

 

● A finalised DVD-R disc is loaded.

Recording and editing cannot be made on

 

 

 

finalised discs. ( pg. 107) Load a

 

 

 

recordable disc on the unit.

 

 

● The disc is full or does not have enough

Clear unnecessary programmes on the

 

 

space for the programme to be recorded.

disc or load a blank disc. ( pg. 69)

 

 

 

 

3.

Timer programming cannot be made.

● Date and time is not correct.

Set date and time correctly. ( pg. 104)

 

 

 

 

4.

Timer programming recording does not

● Power failure occurred before the timer

Check the timer programming. ( pg. 61)

 

start.

programmed recording starts.

 

 

 

 

 

5.

SHOWVIEW Timer Programming cannot

● Date and time set on the unit is not

Set date and time correctly. ( pg. 104)

 

be made.

correct.

 

 

 

● The channel position does not

Set the correct channel position for the

 

 

correspond to that in the receiving area.

receiving broadcast. ( pg. 98)

 

 

 

 

6.

Automatic Satellite Programming

● The satellite receiver is not connected

Connect the satellite receiver to the L-2

 

recording does not start.

properly to this unit.

IN/DECODER connector properly.

 

 

 

( pg. 88)

 

 

 

 

7.

On the front display panel, “– –:– –”

● Power failure occurred.

Set date and time correctly. ( pg. 104)

 

appears.

 

 

 

 

 

 

8.

“PROGRAM FULL” appears on the TV

● Eight programmes have already been

Clear unnecessary programmes on the

 

screen during timer programming.

timer programmed.

unit, then try timer programming again.

 

 

 

( pg. 61)

 

 

 

 

9.

The disc space does not increase when

● The PC’s data recorded on a DVD-RAM

Format the disc. (When the disc is soiled,

 

recorded programmes are cleared.

drive cannot be cleared on this unit.

wipe the disc with a soft dry cloth before

 

 

 

formatting.) ( pg. 9, 106)

 

 

 

INITIALIZING

 

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Malfunction occurs on the unit.

 

Press 1 to turn off the unit, press and

 

 

—

hold 1, then press 8 for two seconds or

 

 

 

more.

 

 

 

 

ATTENTION:

This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the mains power cord. Then plug it in again and turn the unit on. Take out the disc. After checking the disc, operate the unit as usual.