EN 81

Edit To Or From Another Recorder

TV receiver

Player

Your unit

21-pin SCART cable (provided)

21-pin SCART cable (not provided)

Another recorder

Recorder

TV receiver

Recorder

Your unit

21-pin SCART cable (provided)

21-pin SCART cable

(not provided)

Another recorder

Player

You can use your unit as the source player or as the recording deck.

Slide the TV/CABLE/SAT/DVD switch to DVD.

A Make connections.

Connect the player’s 21-pin SCART connector to the unit’s 21-pin SCART connector as illustrated.

AWhen using your unit as the source player:— connect its L-1 IN/OUT connector to the recording deck.BWhen using your unit as the recording deck:— connect its L-1 IN/OUT or L-2 IN/DECODERconnector to the source player.●If another recorder is compatible with the Y/C signal:

—when using your unit as the source player, set “L-1 OUTPUT” to “SCART S-VIDEO”. ( pg. 82, “L-1 Output and L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)”)

—when using your unit as the recording deck, set “L-2 SELECT” to “S-VIDEO”. ( pg. 83, “L-2 Select Setting (L-2 SELECT)”)

B Set the input mode of recording deck.

With this unit, press PR +/– to select “L-1” for the L-1 IN/ OUT connector, or “L-2” for the L-2 IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the L-2 IN/DECODER connector, set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 83, “L-2 Select Setting (L-2 SELECT)”)

C Set the recording speed.

Press REC MODE repeatedly until the desired recording speed appears.

D Start the source player.Engage the Play mode of the source player.E Start the recording deck.Engage the Record mode of the recording deck.

F Stop dubbing.

Stop recording on the recording deck, then stop playback on the source player.

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 95)

●If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this unit’s S-VIDEO and AUDIO input connectors on the front panel. Then, set the unit’s input mode

to “F-1” in step B, and set “F-1 INPUT” to “S-VIDEO”. ( pg. 83, “F-1 Input Setting (F-1 INPUT)”)