JVC DR-M10S Placing a Disc, Care and Handling of Discs, Unit, Storage, Disc tray, Label side, Remote control, Recording side, Double-sideddiscs:, Single-sideddiscs:

EN 9

Placing a DiscOpening the disc trayPress x on the unit or remote control to open the disc tray.

	REC MODE LIVE CHECK
	OPEN/
	SET UP DISPLAY ON SCREEN CLOSE
SAT#	REC MODE
VIDEO	PROGRESSIVE
	AUDIO SUBTITLE ANGLE SCAN
	PULL - OPEN
F1	DV DV IN
S-VIDEO VIDEO L(MONO)-AUDIO-R
Unit	Remote control

●Pressing the button on the unit or on the remote control again closes the disc tray.

●Use the buttons on the unit or on the remote control to open and close the disc tray.

●Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure.

●Do not place unplayable discs or any object other than a disc on the disc tray.

●Do not press down strongly on the disc tray or place any heavy objects on it.Discs without cartridgesDisc tray

Place the disc on the disc tray with the label side facing up. Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged. To insert an 8 cm disc, place it according to the inner groove.

DVD-RAM discs contained in cartridgesDouble-sided discs:

Align the cartridge with the grooves on the disc tray as shown in the illustration and insert with the label side you wish to play back or record facing up. If you insert the disc with label “Side A” facing up, programs are recorded on the side A.

Single-sided discs:

Align the cartridge with the grooves on the disc tray as shown in the illustration and insert with the label side facing up.

Care and Handling of DiscsHow to handle discs When handling a disc, do not touch the surface of thedisc. Since discs are made

of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will

not be picked up correctly,and such a disc may cause the unit to malfunction.Label side

Do not damage the label side, stick paper to or use any adhesives on its surface.

Recording side

Make sure that discs are not scratched and dirty on the recording side before use. Scratches and dirt on the recording side of a disc may hinder proper playback and recording. Also be careful that a DVD-RAM disc may get scratched or dirt when removed from cartridge then put back in after use.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the centre outwards. If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION

Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.